How to Make Zipper Pullers?

Zipper is a kind of auxiliary material, which is commonly used in various products. Due to its wide application, there are many kinds of zippers, such as long chain resin zippers, heavy duty waterproof zippers, invisible nylon zippers and so on. In our daily life, we find that even metal zippers are fragile. It often appears passivation, deformation and other adverse phenomena, most of which are due to the influence of environmental factors.

A common problem with metal zippers, for example, is passivation, which can easily react with oxygen or other chemicals. This point has been taken into account when making zippers, so zippers are generally treated accordingly. In this case, if there are similar problems, it is mainly because of improper operation in the preservation process of the zipper slider assembly machine. Deformation often occurs on nylon and plastic zippers. The wear resistance and strength of this kind of zipper is definitely lacking because of the different materials. If the ambient temperature is too high or too low, it is very easy to deform under the action of external forces. As an important part of a zipper, the zipper puller is often damaged. So, how to make zipper pullers?

1. Prepare a small piece of fabric (preferably not a thick one) and fold it in half along the dotted red line.

2. At this point, we should fold the ends inward ("M" when viewed from the side).We need to make sure that the red arrow is the final size. The front end and back end should bend around 5mm. So, if the fabric is still very long, we need to cut it a bit more.

3. Sew both sides with a zipper machine. At this point, the width we set should be about 2 mm larger than the final size (because it will be smaller if you turn back to the front).

4. Cut off the excess seam width and turn it over with a pinch.

5. Finally, we should put it on the top of the zipper and sew the joint several times with the sewing machine. In this way, the zipper puller is finished.

On the one hand, in the process of choosing zippers for clothing, we should not only pay attention to the color and fabric difference of the zipper fabric, but also pay attention to the color fastness of it. On the other hand, in the process of zipper production, whether the color fastness of the zipper reaches its standard level to a certain extent, and whether the color shift between the zipper and the garment will occur, will directly affect the final product quality.

Therefore, as a manufacturer, three factors of zipper should be paid attention to when choosing a zipper supplier. In this way, you can avoid the occurrence of these problems and improve the quality of clothing. The die cast fish machine and zipper metal slider machine in LONGQI are well received by people. The company is committed to providing customers with solutions and personalized services using advanced industrial technologies.