What If the Crusher Machine Is Too Slow?

The faster the speed of the automatic crusher machine, the higher the production efficiency. However, due to technical constraints, the current electric crusher machine speed is not ideal. In order to improve the speed, experts summed up the following technical points.

Properly Adjust The Gap between Hammer and Screen

The friction force on the screen surface varies with the distance between the material and the screen surface. By adjusting the gap between the hammer and the screen, we can increase the hammering speed difference between the hammer and the material and improve the production efficiency of the efficient crusher machine. But in the feeding process, the gap between hammer and screen needs to be adjusted frequently because of the different screen holes and raw materials. After the high speed crusher machine has just started working and working for a period of time, the particles in the inner chamber of the vertical crusher machine will also change. Among the many parts of the hydraulic crusher machine, the hammer is easy to be worn. After the front end of the hammer is worn, the gap between the hammer and the screen will increase, which will lead to the change of friction between the hammer and the screen, which will lead to the decrease of the production efficiency of the pneumatic crusher machine.

Rational Use of The Burr on The Back of Screen

Because there are many burrs on the back of the screen, the back of the screen can be used to increase friction. But because the burr will be gradually flattened by the material, this method can only last 30 minutes to 1 hour. 

Increase Negative Pressure System

By installing the negative pressure system on the hammer crusher machine, the friction force between the material and the screen surface can be increased, and the speed of hammering the material can also be increased. But the negative pressure system will increase the wear of hammers and screens, thus reducing their service life. At the same time, the negative pressure system will also increase the power consumption of the energy-efficient crusher machine.

Using Fish Scale Screen

Unlike traditional screens, there are many small protrusions on the surface of the fish scale screen. These protrusions can increase friction. But because the price of fish scale screen is higher than that of ordinary screen, it is difficult to be widely used. In addition, although fish scale screen can increase production, using the fish scale sieve will also increase costs.

Use Thin Hammer

The thickness of the thin hammer is generally below 4 mm. In general, the use of thin hammer can increase the crusher's output by about 20%. Although the thin hammer is useful, its service life is shorter than that of ordinary hammer. In general, the service life of thin hammer is about 10 days. Therefore, if the thin hammer is installed on the low consumption crusher machine, it needs to be replaced frequently. This will lead to an increase in the combined cost.